In this post, I’ll be explaining how to flash your Nokia phone or update the firmware using just a usb cable without any flashing box like JAF, Cyclone and the rest of them. All that is needed is a usb cord, two softwares and an internet connection. I previously made two posts on servicing nokia phones. One was how to read nokia phone security code using usb and the other was how to reset the security code back to the default code.
Nokia 1100 - Settings Settings (Menu 6) In this menu you can adjust various settings of the phone. You can also reset some menu settings to their default values. Nokia 5233-5232-5228 RM-625 Flash File MCU PPM CNT v51.1.002 Nokia Nokia 5233-5232-5228 RM-625 Flash File MCU PPM CNT Latest FIRMWARE DOWNLOAD v51.1.002 Type. Succesfull unlock & flash nokia 215 rm-1110 + mtk-6260 without box by rizvan. Wednesday, November 11, 2015 in FLASHING, MTK, NOKIA, SOLUTIONS, UNLOCK. Nokia 1100 Flash File. Nokia 1100 Official Firmware (Flash File RH-18) without password & 100% OK! Nokia 1100 Stock ROM - No Dead Risk with Updated User. How to change nokia 1100 operator: revdevils: Nokia Multimedia: 4: 12:59: how to flash nokia 1100 in ufs-2. Trygoodboy: Nokia Hardware & Hardware Repair: 1: 20:06: how to lock nokia 1100 in 1 network( 629 10) with TORNADO UFS-3: leroi: UFS2 + UFS3-Tornadoflasher: 1: 11:36: Any ideas how to unlock Nokia 1100.
A lot of people often hear about “flashing mobile phones” without knowing what it actually means. Flashing a phone means re-installing the phone’s firmware files, that is, re-installing the operating system of the phone. When a phone’s operating system files are corrupt due to incompatible applications, virus attack and so on, flashing might be the only solution when restoring factory settings doesn’t work. Apart from this, flashing a phone too can be used to update the firmware to a newer version, install a cracked firmware, “wake” a dead phone, etc.
I have to emphasize that flashing a phone shouldn’t be done just for fun as it might be useful and dangerous at the same time. Yes, flashing a phone can wake a dead phone, so also flashing a working phone can kill it!
You should also note that flashing a contract phone such as phones on T-mobile prepaid phone plans may not sit well with your operator and make you lose any warranty you’re entitled to.
ALSO NOTE THAT THESE SOFTWARES
To flash your phone through usb, you need these:
i. Navifirm – to download the phone’s firmware
ii. Phoenix Service Suite
iii. Nokia PC Suite
iv. A good USB cable
1. Install Phoenix. This might take a pretty long time if you’re using a slow computer but you’ve got to be patient
2. Run Navifirm but be sure to have a working internet connection before doing this. It connects to the internet and loads all available Nokia phones firmwares. This too also takes a long time and requires a steady internet connection so you need some patience here too.
3. Be sure your phone’s battery is charged to at least 50% though flashing should take less than 10 minutes.
4. Select your phone type under Products. It is located on the phone just beneath the battery. For example, N97’s product type is RM-505, RM-133 for N73 and RM-596 for Nokia N8. (You can as well check it by dialling *#0000# in standby.)
5. Wait till it loads Releases. From here, you can see all available firmware versions. Select the latest you find there.
6. It now loads Variants, select your desired product code from the list. You can also check beneath the battery to find the original product code.
7. Now select all the files and download. Select Download with IDMM (Internet Download Manager) if you have it installed it on your PC. If not, select, Download with program and choose the destination folder.
8. Go to C:/Program Files/Nokia/Phoenix/Products
Create a folder with the name as your phone product type.
For example, for Nokia N97, the folder will be named RM-505
The firmware files you downloaded will then be located in C:/Program Files/Nokia/Phoenix/Products/RM-505
9. Now run PHOENIX and connect your mobile phone in PC Suite mode. If phoenix detects your phone automatically, skip steps 110-14.
10. In Phoenix, click File > Manage Connections > New.
11. Now select the type of cable you are using. If you are using DKE-2, CA-53, Micro USB cable, select USB.
12. Click Next. It will find your product and say FOUND. If it doesn’t find any, you can try changing your cable type by clicking Back.
13. Click Next and then Finish.
14. Now your cable type (USB) appears in the connection list. Select it. Click APPLY and then CLOSE.
15. Now select File > Open Product.
16. A list of RM codes will open. Select your phone’s RM code.
17. Now select File > Scan Product.
18. Your phone’s firmware info will appear at the extreme bottom of the Phoenix Service Software window.
19. Now select Flashing > Firmware Update. At this point, Phoenix will automatically load the firmware files we talked about in step 8. If it doesn’t, make sure you named that directory accordingly and please go over step 8 again.
20. If everything up to step 20 goes well, select “Refurbish”, wait until the “Successful” dialog box appear (DO NOT touch or disconnect the phone or USB cable during the process). Press OK, phone will disconnect and restart.
At the end Phoenix will tell you to disconnect your phone as the flashing has finished butome phones may not boot up automatically after the flashing has finished. In those cases, remove the battery and then insert it and manually start the phone.
FLASHING A DEAD PHONE WITH PHOENIX
The procedure is almost same as above but with litle differences.
1. Start Phoenix. Connect your phone through USB Cable (we are flashing a dead phone so the phone is off)
2. Click File > Open Product. Select your RM code from the window that appears. Click OK.
3. Click File > Manage Connections. Select No Connection. Then APPLY and CLOSE.
4. Now select Flashing > Firmware Update.
5. Check the option “Dead Phone USB Flashing”.
6. Click Refurbish and the flashing process is started.
7. After some time, flashing will pause asking you to turn on your phone.
8. Press the POWER button of your phone until the backlight comes up.
9. Flashing will proceed. Your phone will automatically start when the flashing finishes. When done, you can safely remove your data cable from handset.
Download Phoenix 2011 from Mediafire(Recommended)
Dua SajidBy Dua Sajid updated April 15, 2020
Nokia 1100 Phone
Find Nokia RM-1011 Flash File, Flash Tool, USB Driver and How-to Flash Manual. The official link to download Nokia RM-1011 Stock Firmware ROM (flash file) on your Computer. Firmware comes in a zip package, which contains are below.
Contents1 Download and Install Nokia RM-1011Download and Install Nokia RM-1011
The Flash File helps out to Upgrade, Downgrade or re-install the Stock Firmware (OS) on your Mobile Device. It fixes any Software problem, Bootloop Issue, IMEI Issue or Dead Issue or etc… The Flash File (ROM) also helps you to repair all Mobile devices.
Download Nokia RM-1011 Stock Firmware (Flash File)
File Name: Nokia_RM_1011_MIRA.zip
File Size: 11 MB
Flash Tool: SP Flash Tool for Windows | SP Flash Tool for Linux
How to Flash: Follow Tutorial
Download Here: Click Here
Watch Video Tutorials about Firmware Stock ROM
How to Flash.PAC Stock ROM Flash File on Any Android Smartphone
These are the Complete Installation Instructions To Install.PAC Stock ROM Flash File For Any Android Smartphones.
Before Flashing Note:
Your Android Device must have At least 35 to 40 Percent of Battery to Perform The Complete Flashing Process.
How to Flash.Pac Stock ROM on Any Android Phone
Step One: Download & Install Up to Date Spreadtrum USB Drivers on your Laptop or Computer. If your PC Already has USB Driver Installed then Just Skip this Step.
Step Two: Download The Latest Stock ROM (.pac) for your Android Phone.
Step Three: Download & extract The Spreadtrum Upgrade Flash Tool to your PC or Computer. After extracting the Zip File, you will able to see these following files like Below Screen:
Step Four: Now, Run The UpgradeDownload.exe. in your Computer From Folder.Step Five: Once Spreadtrum Upgrade Flashing Tool SPD is Completely Started, Just Connect your Android Device to the computer or Laptop (Confirm That Your Smartphone is switched off).
Step Six: Once your Android Smartphone is successfully connected with Your Computer, Now Press Load Packed Option And add the .pac ROM flash file (which you downloaded as .pac).
Step Seven: After successfully added the. Pac The Firmware file in Spreadtrum SPD Upgrade Flashing Tool, Now Press the Start Downloading Option to Begin the Flashing process.
Step Eight: During the Flashing Process your Device will restart automatically. Once ROM Flashing Process is completed, you will see the Green Passed Pop-up Window in The SPD Spreadtrum Upgrade Tool Screen.
Step Nine: Now Congratulation you have successfully flashed your Device to The latest Version using with SPD Spreadtrum Upgrade Tool. Now Go to Settings > About Phone > Check firmware version & ENJOY.
Download SP Flash Tool
Nokia 1100 Specs
Important Note:
This was all about Flashing Stock Firmware. For more such articles, keep visiting our Pages. Or you can also subscribe to our Newsletter so as to receive timely notifications of our posts and not miss any update of the technology world.
- Download and extract the file stock firmware file on your computer.
- After extracting the file, you will be able to get the Firmware File, Flash Tool, Driver, and How-to Flash Guide.
- Install the provided USB Driver on your Computer.
- Follow the How-to Flash Manual to Flash the Firmware on your Device.
Download Android USB Drivers
AuthorRecent PostsDua SajidNokia 1100 Flash File Exe
CEO & Founder at AllFirmwareFileHi there, my name is Dua Sajid. I am the person behind AllFirmwareFile, which is a website for solving all your firmware related problems. I have been working in the online field for past 5 years or so.Latest posts by Dua Sajid (see all)- Archos AC55 Platinum - November 19, 2020
- Archos Alba 4 - November 19, 2020
- Archos Alba 5 3G - November 19, 2020
Share This:
Nokia 1100 Price In India
Related Posts:
Flash Nokia 1100